
Attach it without looking
A raised X lines up the plates and stops the drive turning. It sits straight every time, so your setup looks clean without trying.
Set up another laptop
The laptop plate of HoldX, sold on its own. Your drives each need a drive plate: one comes with every HoldX.
25% off orders over £75
1 × HoldX laptop plate (Base Component), 3M adhesive applied.
The 2- and 4-pack hold two or four laptop plates. Spare adhesive isn't included.
Your drives need drive plates. One comes with every HoldX, or get them on their own as the HoldX Device Component.
The flat half
The laptop plate is thin stainless steel, 2 mm, with a raised plastic X and no magnet. The magnets are in the drive plate, which clicks onto it and holds up to 1.2 kg.
Clicks on straight
The raised X fits into the drive plate, so the drive won't slide or turn.
Kind to your laptop
The plate sits on a layer of 3M tape, so its metal never touches your lid. Leave room for the 3-in-1 Phone Mount if you use one: place it near the top of the lid, towards one side.
Set it up once
Clean both surfaces, line the plate up, then press and hold. The adhesive is made to stay, so choose the spot with care.
Moving it takes heat and new tape
Warm the plate gently, with a hairdryer for example, then lift it with dental floss, fishing line or a plastic scraper. Some tape residue can stay behind; rub it off, or use an alcohol wipe. Sticking it on again needs new 3M tape.
Holds more than SSDs
Any flat, hard surface at least 5 cm across takes a laptop plate: a second laptop, the back of your monitor, the underside of your desk.
Works with your first HoldX
2.0 plates click onto first-version plates.
Steel with a plastic X
The laptop plate is now stainless steel with a raised plastic X, so nothing scratches and nothing wears out.
1 mm thinner
Both plates together are now under 6 mm.
Works with your first HoldX
2.0 laptop plates take first-version drive plates.
Free shipping
From $65 in the US, €65 in the EU, £55 in the UK, C$100 in Canada, A$100 in Australia and US$100 everywhere else. Duties and taxes, where they apply, are shown at checkout. Shipping details
Where we ship from
Our warehouses in the US, Slovenia and Canada, whichever is best placed for your order. Orders usually leave the same or next business day.
60-day returns
Not the right fit? Tell us within 60 days of delivery, no reason needed. Return labels are free in the US, EU and UK. Elsewhere you pay return shipping, unless the item is faulty or wrong. How to return
Warranty
2-year limited warranty on defects in materials and workmanship. Your legal rights are not affected. Warranty and legal guarantee

A raised X lines up the plates and stops the drive turning. It sits straight every time, so your setup looks clean without trying.

(2 mm / 0.08 in) thin. With the drive off, you'll barely notice it's there.

Carry your laptop with the drive clicked on, still plugged in.
From your setups
1.2 kg
rated hold, with a drive plate
4 sec
to swap one drive for another
2 mm
thin, with the drive off
Registered design
This is the laptop plate: thin steel with a raised plastic X and no magnet. The drive plate clicks onto it.
2 mm of steel
With the drive off, it's so flat you'll barely notice it's there.
Always sits square
The plates click together on a raised X, so the drive lines up the same way every time.
Silicone, about 5 mm
A little thicker, since it holds the magnets. The X fits into it, so both plates together are under 6 mm.
Modular system
Add a laptop plate wherever you want your drives. Nothing on HoldX wears out, so every swap clicks on like the first.



With a laptop plate on each laptop, your drives click onto whichever one you open. It works behind a monitor or under a desk too.
Each drive needs a drive plate, sold on its own.
Drive plates also hold a hub, a power bank or a card reader, and the laptop plate takes the DeltaHub 3-in-1 Phone Mount if you place it to suit both.
Use cases
Out in the field, on a flight or in a hammock: wherever your laptop goes, your drive clicks on.

Editing mid-flight

Working from a hammock

Backing up on location

Fit check
Anywhere flat and hard, at least 5 cm across.
Setup and removal
Strong 3M adhesive keeps the plates, and your drive, in place on the move. Taking a plate off takes a little heat and patience, and leaves no marks.

Clean both surfaces, line the plate up, then press and hold. The adhesive is made to stay, so choose the spot with care.
When you change laptops, warm the plate gently, with a hairdryer for example, then lift it with dental floss, fishing line or a plastic scraper.
It leaves no marks, though some tape residue can stay behind; rub it off, or use an alcohol wipe.
Sticking it on again needs new 3M tape. Spare adhesive isn't included.
Specs
FAQ
A drive plate on each drive. If you already have HoldX, your drives have them and click straight on. If not, get the HoldX set, which comes with both plates and costs less than buying them separately, or add drive plates for £22.00.
No. The laptop plate sits on a layer of 3M tape, so its metal never touches your lid. And when you take it off, it leaves no marks.
Yes, with a little care. We use strong 3M tape so the plates, and your drive, stay in place on the move. To move a plate, warm it gently, with a hairdryer for example, then lift it with dental floss, fishing line or a plastic scraper. It leaves no marks, though some tape residue can stay behind; rub it off, or use an alcohol wipe. To stick it on again, you'll need new 3M double-sided tape.
Yes. The Phone Mount clicks onto the same laptop plate, so one plate on your lid takes either your drive or your phone. Place it near the top of the lid, towards one side.
Yes. 2.0 laptop plates take first-version drive plates, so your drives click straight on.
No. With the drive off, the laptop plate sits flat and barely shows: it's 2 mm thick.
Go further
Magnetic mount, stand and grip

Black Friday 2026
Lifetime warranty on your Black Friday order.
Sign up and order with the same email by Mon 30 Nov. Everything in that order is covered for life, not just 2 years.
Covers manufacturing defects on products in orders placed with this email from 16 to 30 Nov 2026, claimed like our standard warranty. You agree to get marketing emails from DeltaHub; unsubscribe anytime. Privacy policy.