Set up another laptop

HoldX Base Component

The laptop plate of HoldX, sold on its own. Your drives each need a drive plate: one comes with every HoldX.

  • Your drives on a second laptop
  • Flat when the drive is off, 2 mm
  • No magnet in this plate, nothing wears out
  • Takes the 3-in-1 Phone Mount too
€19,90

25% off orders over €90

ColorBlack
Pack1-Pack
What's in the box

1 × HoldX laptop plate (Base Component), 3M adhesive applied.

The 2- and 4-pack hold two or four laptop plates. Spare adhesive isn't included.

Your drives need drive plates. One comes with every HoldX, or get them on their own as the HoldX Device Component.

How it works

The flat half
The laptop plate is thin stainless steel, 2 mm, with a raised plastic X and no magnet. The magnets are in the drive plate, which clicks onto it and holds up to 1.2 kg.

Clicks on straight
The raised X fits into the drive plate, so the drive won't slide or turn.

Kind to your laptop
The plate sits on a layer of 3M tape, so its metal never touches your lid. Leave room for the 3-in-1 Phone Mount if you use one: place it near the top of the lid, towards one side.

Set it up once
Clean both surfaces, line the plate up, then press and hold. The adhesive is made to stay, so choose the spot with care.

Moving it takes heat and new tape
Warm the plate gently, with a hairdryer for example, then lift it with dental floss, fishing line or a plastic scraper. Some tape residue can stay behind; rub it off, or use an alcohol wipe. Sticking it on again needs new 3M tape.

Holds more than SSDs
Any flat, hard surface at least 5 cm across takes a laptop plate: a second laptop, the back of your monitor, the underside of your desk.

Works with your first HoldX
2.0 plates click onto first-version plates.

What's new in HoldX 2.0

Steel with a plastic X
The laptop plate is now stainless steel with a raised plastic X, so nothing scratches and nothing wears out.

1 mm thinner
Both plates together are now under 6 mm.

Works with your first HoldX
2.0 laptop plates take first-version drive plates.

Shipping & returns

Free shipping
From $65 in the US, €65 in the EU, £55 in the UK, C$100 in Canada, A$100 in Australia and US$100 everywhere else. Duties and taxes, where they apply, are shown at checkout. Shipping details

Where we ship from
Our warehouses in the US, Slovenia and Canada, whichever is best placed for your order. Orders usually leave the same or next business day.

60-day returns
Not the right fit? Tell us within 60 days of delivery, no reason needed. Return labels are free in the US, EU and UK. Elsewhere you pay return shipping, unless the item is faulty or wrong. How to return

Warranty
2-year limited warranty on defects in materials and workmanship. Your legal rights are not affected. Warranty and legal guarantee

A hand bringing a drive to the HoldX laptop plate on a laptop lid

Attach it without looking

A raised X lines up the plates and stops the drive turning. It sits straight every time, so your setup looks clean without trying.

A HoldX laptop plate on a laptop lid, a drive in hand above it

Flat when the drive is off

(2 mm / 0.08 in) thin. With the drive off, you'll barely notice it's there.

A drive held on the back of a laptop, cable plugged in, as it is carried

Close your laptop and go

Carry your laptop with the drive clicked on, still plugged in.

From your setups

Look as good as your work

1.2 kg

rated hold, with a drive plate

4 sec

to swap one drive for another

2 mm

thin, with the drive off

Registered design

The flat half

This is the laptop plate: thin steel with a raised plastic X and no magnet. The drive plate clicks onto it.

The two HoldX plates: the laptop plate with the raised X, and the drive plate with the X recess

2 mm of steel

With the drive off, it's so flat you'll barely notice it's there.

Modular system

More places for your drives

Add a laptop plate wherever you want your drives. Nothing on HoldX wears out, so every swap clicks on like the first.

A person working on a bench with a drive on the laptop lid
A laptop with a HoldX plate and sleeved SSDs on a mat
A laptop with HoldX plates on its lid and a phone on the 3-in-1 Phone Mount

With a laptop plate on each laptop, your drives click onto whichever one you open. It works behind a monitor or under a desk too.

Use cases

Wherever you open your laptop

Out in the field, on a flight or in a hammock: wherever your laptop goes, your drive clicks on.

  • A drive with a HoldX plate held up at a plane window

    Editing mid-flight

  • A laptop with a drive on its lid over a hammock in the jungle

    Working from a hammock

  • An orange rugged drive on the back of a laptop outdoors

    Backing up on location

Typing outdoors with a drive on the laptop lid, cable plugged in

Fit check

Where can it go?

Anywhere flat and hard, at least 5 cm across.

  • A laptop lidClean it, line the plate up, then press and hold. Near the top, towards one side, leaves room for the 3-in-1 Phone Mount.
  • A monitor or a deskHard plastic, metal, glass or wood: the back of your monitor, even the underside of your desk.
3-in-1 Phone MountFrom €39,90

Setup and removal

Stays put until you change laptops

Strong 3M adhesive keeps the plates, and your drive, in place on the move. Taking a plate off takes a little heat and patience, and leaves no marks.

A hand holding an SSD with a HoldX plate, next to a laptop with the second plate

Stick it once

Clean both surfaces, line the plate up, then press and hold. The adhesive is made to stay, so choose the spot with care.

Warm it, then lift it

When you change laptops, warm the plate gently, with a hairdryer for example, then lift it with dental floss, fishing line or a plastic scraper.

Clean off what's left

It leaves no marks, though some tape residue can stay behind; rub it off, or use an alcohol wipe.

Sticking it on again needs new 3M tape. Spare adhesive isn't included.

Specs

Details that matter

Size
5 × 5 cm
Thickness
2 mm. With a drive plate on, both together are under 6 mm, because the X fits into the drive plate
Materials
Stainless steel, with a raised plastic X
Magnets
None. The magnets are in the drive plate
Hold
With a HoldX drive plate, rated to hold 1.2 kg
Adhesive
3M adhesive, applied
Fits
A flat, hard surface at least 5 cm across: a laptop lid, the back of a monitor, the underside of a desk
Works with
HoldX drive plates (Device Component), 2.0 and first version; DeltaHub 3-in-1 Phone Mount
Colours
Black, Silver
In the box
1 × HoldX laptop plate, adhesive applied. 2- and 4-packs: two or four laptop plates. No drive plate

FAQ

Questions? Stick around.

Do I need anything else?

A drive plate on each drive. If you already have HoldX, your drives have them and click straight on. If not, get the HoldX set, which comes with both plates and costs less than buying them separately, or add drive plates for €24,90.

Will it scratch my laptop?

No. The laptop plate sits on a layer of 3M tape, so its metal never touches your lid. And when you take it off, it leaves no marks.

Can I move it to another laptop or drive?

Yes, with a little care. We use strong 3M tape so the plates, and your drive, stay in place on the move. To move a plate, warm it gently, with a hairdryer for example, then lift it with dental floss, fishing line or a plastic scraper. It leaves no marks, though some tape residue can stay behind; rub it off, or use an alcohol wipe. To stick it on again, you'll need new 3M double-sided tape.

Can I use it with the 3-in-1 Phone Mount?

Yes. The Phone Mount clicks onto the same laptop plate, so one plate on your lid takes either your drive or your phone. Place it near the top of the lid, towards one side.

Does it work with my first HoldX?

Yes. 2.0 laptop plates take first-version drive plates, so your drives click straight on.

Isn't it bulky?

No. With the drive off, the laptop plate sits flat and barely shows: it's 2 mm thick.

Go further

Complete your setup

HoldX Base Component, black: the aluminium plate for your laptopHoldX Base Component, silver: the aluminium plate for your laptop
HoldX Base Component

Laptop-side half

Sale price€19,90€19,9025% off orders over €90
HoldX SSD Magnetic Mount @nodrawer #Color_BlackHoldX SSD Magnetic Mount
HoldX SSD Magnetic Mount

Magnetic SSD mount

Sale price€39,90€39,9025% off orders over €90
HoldX Device Component, black: the silicone plate for your driveHoldX Device Component, silver: the silicone plate for your drive
HoldX Device Component

Drive-side half

Sale price€24,90€24,9025% off orders over €90
3-in-1 Phone Mount @nodrawer3-in-1 Phone Mount
3-in-1 Phone Mount

Magnetic mount, stand and grip

Sale price€39,90€39,9025% off orders over €90 · Ships next week